BVRPM - AR-20 FLOOR GROUT
- MSDS: BVRPM
- Manufacturer: DAP INC
- Product Name: AR-20 FLOOR GROUT
- National Stock Number: 8040-00F036358
Product Identification
Product ID:AR-20 FLOOR GROUT
MSDS Date:02/10/1992
FSC:8040
NIIN:00F036358
MSDS Number: BVRPM
Responsible Party
DAYTON, OH 45401-0277
US
Emergency Phone: 513-667-4461/800-543-3840
Info Phone: 513-667-4461/800-543-3840
Cage: 90300
Contractor
Telephone: 513-253-7154/800-543-3840
Cage: 90300
Ingredients
SILICON DIOXIDE, CRYSTALLINE QUARTZ, SAND (ANIMAL
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 55-65%
OSHA PEL 0.1 MG/CUM RESP DUST
ACGIH TLV: 0.1 MG/CUM RESP DUST
TRICALCIUM SILICATE, DICALCIUM
CAS: 65997-15-1
RTECS: VV8770000
Fraction By Weight: 30-40%
OSHA PEL 5/MG/CUM
ACGIH TLV: 10 MG/CUM (DUST)
TITANIUM DIOXIDE, TIO2 (SUSPECTED ANIMAL CARCINOGEN BY
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 0-10%
OSHA PEL 15 MG/CUM
ACGIH TLV: 10 MG/CUM (DUST)
COLUMBIA CARBON, CARBON BLACK, LAMPBLACK, BLACK PEARLS
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 0-5%
OSHA PEL 3.5 MG/CUM
ACGIH TLV: 3.5 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:WET CEMENT CAN DRY THE SKIN & CAUSE
ALKALI BURNS. EXPOSURE TO DUST MAY RESULT IN BUILD UP OF MATERIAL
IN EYES, EARS, NOSE & MOUTH WHICH MAY CAUSE IRRITATION. CHRONIC:
INHALATION OF DUST MAY RESULT IN PULMONARY & RESPIRATORY DAMAGE.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:WET CEMENT CAN DRY THE SKIN & CAUSE ALKALI
BURNS. EXPOSURE TO DUST MAY RESULT IN BUILD UP OF MATERIAL IN EYES,
EARS, NOSE & MOUTH WHICH MAY CAUSE IRRITATION. CHRONIC: INHALATION
OF DUST MAY RESULT IN PULMONARY & RESPIRATORY DAMAGE.
Medical Cond Aggravated by Exposure:ASTHMA & ASTHMA-LIKE CONDITIONS
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN: WASH W/SOAP
& WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:>200F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE WATER SPRAY TO COOL EXPOSED SURFACES.
Accidental Release
Spill Release Procedures:VACUUM UP & REUSE EXCESS POWDER. PLACE
REMAINING POWDER INTO CONTAINERS.
Handling
Handling and Storage Precautions:STORE AWAY FROM ACIDS, CAUSTICS &
OXIDIZERS. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. KEEP
FROM EXCESSIVE HEAT & FREEZING.
Other Precautions:PRODUCT FORMS AN ALKALI DISPERSION W/WATER. KEEP OUT
OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:8 HOUR EXPOSURE LIMIT/VALUE IS EXCEEDED FOR ANY
COMPONENT, USE AN APPROVED NIOSH/OSHA RESPIRATOR.
Ventilation:IF DRY SANDING, PROVIDE SUFFICIENT MECHANICAL TO MAINTAIN
EXPOSURE BELOW PEL & TLV.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:2.3-2.4
Solubility in Water:DISPERSES
Appearance and Odor:SANDY FREE-FLOWING POWDER, VARIOUS COLORS
Percent Volatiles by Volume:<1
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS, STRONG OXIDIZERS, & CAUSTICS.
Stability Condition to Avoid:EXCESSIVE HEAT & FREEZING.
Disposal
Waste Disposal Methods:DON'T REUSE EMPTY CONTAINERS. DISPOSE OF
IAW/LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.